MagicEzy
Contact the store for delivery options (250) 334-2886
Pickup available at 2946 Kilpatrick Avenue
Usually ready in 24 hours
Tech Specs
MagicEzy Hairline Fix seals and colors stress cracks… FAST. The structural grade adhesion helps prevent cracks from spreading. Available in 11 colors. Repairs guaranteed for 3 years. Size: 12.9mL / 0.43 fl OZ resealable tube.
- Repairs very fine cracks and scratches
- Easy to use, one-part solution
- Helps prevent cracks from spreading
- Available in 11 colors
- 3 year repair guarantee
- 30 day money-back satisfaction guarantee
- Fiberglass / Gelcoat – Boats, jet skis, kayaks, RVs
- Ceramics & Stone – Tiles, bench tops, vanities
- Showers, baths, basins & vanities
- Most plastics* – Canoes, kayaks, dinghies
- Aluminum and metal* – Boats, cars, appliances
- 9 Second Chip Fix repairs for a gloss finish
*For plastic or aluminium surfaces, prepare the surface using MagicEzy Mega Fusion first.
Additional Information
Video
SDS
Instructions
1. Prepare
- Do not use below 10°C / 50°F
- Suitable for above the waterline use.
- Scrape a pin point along crack to remove grime and dirt.
- Wash/scrub soapy water into damage then rinse with clean water. Allow to fully dry in sun or accelerate dry with a hairdryer.
- Rotate/shake the tube for 30 seconds for even consistency.
Color match?
Mix two or more colors on a clear plastic wrap. View new color when placed over the surface.
2. Apply
- For plastic or aluminum surfaces apply a thin coat of MagicEzy MegaFusion Primer / Sealant and allow 2 hours to cure (at 70ºF/20º C).
- Have a tissue ready in your spare hand.
- APPLY a drop on the damage.
How do I apply on vertical surfaces?
To prevent slumping or for a fast dry use a hairdryer for 3 minutes to form a skin.
3. Level
- Rapidly wipe the ‘LEVEL’ across the repair 5 times. FAST wipes help Hairline Fix penetrate deeply inside the damage.
- Clean the ‘LEVEL’ with the tissue and TRIM off surface smears.
- Some deep cracks may require several coats to fill completely. Allow at least 2 hours in between coats before re-applying (overnight is best).
How do I apply in hot/cold weather?
In temperatures above 90ºF (30ºC) lay a damp towel over the area until hand temperature is reached. Below 55ºF/15ºC set with hairdryer for 3 minutes.
4. Trim
- TRIM to remove smears off the repair edge (but not the repair itself). Dampen or use a tissue to help clean-up if necessary.
DRYING time varies depending on temperature. FAST DRY using a hot hair dryer for 3 minutes + 30minutes cool down. NORMAL DRY: 2 hours (at 70ºF/20º C). It will harden overnight and achieve maximum strength and adhesion after 14 days.